前段时间自己把1041扩到了8M rom,空间大了,可以加装的软件也多了.
这两天,也学人在openwrt中装ipv6 6in4来玩玩.发觉按网上的讲法,勾选了"动态隧道 启用HE.net动态终端更新",填了资料,路由中始终ping不通ipv6.google.com,tunnelbroker.net中也不会自动更新IP,查了不少资料,把密码,用户ID,逐一用md5加密后,再填入,也始终不成功.但手动在tunnelbroker.net中填入IP,IPv6就正常了.到底是什么原因,openwrt更新不成功ipv4地址?
试了两天时间,真的一筹莫展.中文资料解决不了,就查英文资料吧.
无意中在he.net的首页发现新闻
引用:
Authentication updates
[January 31, 2014]
In order to improve account security, some changes have been made to how tunnel endpoint updates are authenticated.
Tunnels made after this post now are configured with an "Update Key" (under the "Advanced" tab on the tunnel information page), which is used instead of the general account password when performing automated updates via either the https://ipv4.tunnelbroker.net/ipv4_end.php or the /nic/update (Dyn-alike) mechanisms. Do not MD5() this value before use.
When an "Update Key" exists, the account password will not work for updates on that tunnel. Existing tunnels can set an "Update Key" to take advantage of this new mechanism.
|
认证升级了?看了一下,原来是采用update key代替密码
立即在he.net高级选项中输入一串16位的字符,并点了保存,再在openwrt中"HE.net密码"修改了一下,ipv6立即就正常了,原来就这么简单.